Description
DESCRIPTION
2K EPOXY COATING is a pigmented polyamide epoxy made with a high solids content and designed for industrial and marine use. it works extremely well as a coating over primer steel.
SPECIFICATION
– Colour : according to colour board
– Viscosity ( Gardner, 25°C) : 90 ± 10s
– Density (g/ml, 25°C) : 1.0 – 1.1 g/ml
– Dust dry time : Max 5 hrs
– Hard dry time : Max 15 hrs
– Grind fineness : Max 30 µm
– Gloss (60°C) : 75-80
– Adhesion : Max 1
– Collision Endurance : Min 50 kg/cm²
– Flexural strengh : Max 1 mm
– Time between coats of paint : Min 4 hrs
Technical information
- Consumption
- Coverage paint theoretically: 9-11m2 / liter / coat..
- Drying time (temperature 300C)
- Dust drying time: 45 mins.
- Surface preparation
- Paintedsurfaces must be clean, dry and free of rust, oil and grease or other contaminants.
- The painted surface must be previously sanded by sandpaper and wipe dust appropriate.
- Solvent
- Dilute with kerosene or gasoline cars.
- Painting time
- Coating 1: after application primer 3 hours.
- Coating 2: 1 layer after application about 6 hours.
- Preservation
- After use, tightly closed barrel, put a cool and dry place.
- Information of safety
- Keep out of reach of children.
- Wear protective goggles and mask when applying. Ensure good ventilation during the construction.
- Avoid contact with eyes. Causing serious damage to the eye if exposed. In case of contact with eyes, rinse with clean water and go to the nearest health center.
Reviews
There are no reviews yet.