Description
SPECIFICATION- Ingredient
- Heat Processing Linseed Oil
- Alkyd Resin
- Additives ang pigments
- Hydrocarbon solvent
- Biocide
- Typical technology data
- D = 0.89- 0.92 g/cm3.
- pH = 5-7 .
- Coverage: 70 – 100g/m2
- Drying times : 1 – 2 hours
- Dust drying time: 30 mins.
- Dry time : 1- 2 hours
- Hard drying time: 2 hours
- Stir the contents thoroughly to ensure any settled pigment is re-dispersed before application.
- Apply the stain across the grain until the wood is saturated on top.
- Wipe the excess stain off in the direction of the wood grain.
- Do not let the stain dry before wiping off the excess.
- A second coat can be applied after 2 hours.
- Do not sand between stain coats.
- Surface preparation
- Surface must be free dust, grease and other contaminants.
- Rub the sandpaper to clean and smooth surface.
- Time of paint
- Should paint on sunny days.
- Avoid painting on rainy days with fog .
- Paint Tools
- Apply with a brush or clean, lint-free cloth.
- Allow Maple Premium Wood Stains to dry for 8 hours when applying an oil-based finish or 24 hours before applying a water-based finish.
- Preservation
- Preservation cool place, avoid sunlight and the power source.
- When removing paint finish must be tightly closed.
- Information about safety
- Keep out of reach of children.
- Avoid fire.
- Wear goggles and a mask when applying. Ensure good ventilation during the construction. .
- Avoid contact with eyes. Causing serious damage to the eye if exposed. In case of contact with eyes, rinse with clean water and many go to the nearest medical center.
